Specificații
General
- Marcă
- CREALITY
- Cod articol
- CR-PETG RED
- Categorie
- Imprimare 3D
- Tip
- Produs fizic
Caracteristici principale
- Material
- PETG
- Culoare
- Rosu
- Viteza de printare
- 50mm/sec
Specificații
- Compatibilitate
- FDM
- Bucăți în pachet
- 1 pc(s)
- Compatibilitate mărci
- Creality 3D
- Diametru
- 1.75 mm
Descriere
Description
Spool Outer Diameter: 20cm
Spool Inner Diameter: 5.5cm
Spool Height: 6.5cm Tensile Strength: 49MPa Net Weight: 1kg Gross Weight: 1.29kg
Printing in PETG provides a sweet spot between PLA and ABS! PETG provides better strength and heat resistance than PLA while being less toxic and easier to print than ABS.
Specifications
Brand: Creality Model: CR-PETG Filament Diameter: 1.75mmSpool Outer Diameter: 20cm
Spool Inner Diameter: 5.5cm
Spool Height: 6.5cm Tensile Strength: 49MPa Net Weight: 1kg Gross Weight: 1.29kg
Recommended Printing Settings for CR-PETG:
For optimal performance, set the following settings in your slicing software before printing.
For Bowden Extruder Printers (eg. Stock Ender 3/Pro/V2)
| Nozzle Temperature | 240±5 C |
| Bed Temperature | 90±5 C |
| Part Cooling Fan State | ON |
| Retraction Speed | 60mm/s |
| Retraction Distance | 8mm |
| Print Speed | 40-50mm/s |
| Travel Speed | 60mm/s |
For Direct Drive Extruder Printers
| Nozzle Temperature | 240±5 C |
| Bed Temperature | 90±5 C |
| Part Cooling Fan State | ON |
| Retraction Speed | 60mm/s |
| Retraction Distance | 6mm |
| Print Speed | 40-50mm/s |
| Travel Speed | 60mm/s |